NEUMOTORS 1500 SERIES BRUSHLESS MOTORS

Neumotors 15 series line drawing

 

     

    1500 SERIES Quick Look:

    • Inrunner construction
    • 40mm OD
    • High speed operation – 60,000 RPM
    • 500-5,000 Watts
    • 4poles / 12 slots

    Options:

    • 3.17mm, 5mm, 6mm, or 8mm shaft diameters available.
    • Cooling fins
    • Waterproofing
    • May be mated with P32 gearboxes for very high power-to-weight drives.
    • Neumotors brushless motors can be assembled in the USA from domestically manufactured components. Please call for details.

    15xx Series Length/Weight/Power Range

    LENGTH
    Continuous
    Watts*
    500
    750
    1,000
    1,250
    1,500
    1,750
    2,000
    2,250
    2,750
    3,000
    3,250
    3,500
    Max
    Watts*
    1,000
    1,500
    2,000
    2,500
    3,000
    3,500
    4,000
    5,000
    5,500
    6,000
    6,500
    7,000
    Physical
    Length
    46mm
    53mm
    61mm
    69mm
    84mm
    84mm
    102mm
    102mm
    108mm
    130.7mm
    130.7mm
    130.7mm
    Weight
    170g
    212g
    280g
    340g
    410g
    478g
    549g
    616g
    685g
    775g
    825g
    895g

     


     1506: 500-1,000 watt brushless motors



     1509: 750-1,500 watt brushless motors



    1512: 1,000-2,000 watt brushless motors



    1515: 1,250-2,500 watt brushless motors



    1518: 1,500-3,000 watt brushless motors



     1521: 1,750-3,500 watt brushless motors



    1524: 2,000-4,000 watt brushless motors



    1527: 2,250-4,500 watt brushless motors



     1530: 2,750-5,500 watt brushless motors


    1533: 3,000-6,000 watt brushless motors


    1536: 3,250-6,500 watt brushless motors


    1539: 3,500-7,000 watt brushless motors


     

    POWER RATINGS (Watts):

    • Continuous rating is the power the motor can deliver while maintaining the external housing temperatures below 100C.
    • MAX power rating is the power the motor can deliver beginning with motor at a temp of 20C until it reaches it's limit temperature of 100C.
    • The ratings are therefore dependent on a number of variables including air flow, ambient air temperature, contact cooling etc.

    MTBF RATINGS:

    When used within the constraints described above, BLDC motors' primary "wear" item(s) are the bearings supporting the shaft. Bearing life is inversely affected by speed, temperature, and radial and axial loads.  While an MTBF figure can be generated, it would be rendered invalid by excursions beyond prescribed temperatures or load limits - such as prop strikes, or side loads.  MTBF must be determined on a case by case basis, and even then, it would be subject to numerous exceptions.

    MAX VOLTAGE

    Limited by kv (RPMs per volt) times the applied voltage.  Max voltage must be kept below the voltage which will spin the motor over max rpm for the motor series.

    MAX AMPERAGE

    See power ratings above.

    COMPONENT SPECIFICATIONS

    • Winding temperature:  -- 180C
    • Magnet grade: - 180C UH grade
    • Bearings:  Japanese SPB bearings