30xx SERIES BRUSHLESS MOTORS

Neumotors 3020 3030 10,000-30,000 watt class motors

30xx SERIES QUICK LOOK:

  • Inrunner construction
  • 10,000 – 30,000 Watts
  • 30,000+ max rpm
  • 4 poles / 12 slots
  • 12mm shaft

Neumotors 3000 series brushless motors are manufactured in a wide variety of lengths and winds to provide increasing power ratings at a number of voltages. Select the desired motor power range from the table below.

OPTIONS:

  • Finned case
  • Waterproof case

May be mated with P42 or P62 gearboxes for very high power-to-weight drives.

30XX LENGTH & POWER RANGES

Length
Continuous
Watts*
10,000
15,000
Max
Watts*
20,000
30,000
Physical
Length
103mm
128mm
Weight
1,934g
2,900g

 3020: 10,000-20,000 watt class BLDC motors


3030: 15,000-30,000 watt class BLDC motors

POWER RATINGS (Watts):

  • Continuous rating is the power the motor can deliver while maintaining the external housing temperatures below 100C.
  • MAX power rating is the power the motor can deliver beginning with motor at a temp of 20C until it reaches it's limit temperature of 100C.
  • The ratings are therefore dependent on a number of variables including air flow, ambient air temperature, contact cooling etc.

MTBF RATINGS:

When used within the constraints described above, BLDC motors' primary "wear" item(s) are the bearings supporting the shaft. Bearing life is inversely affected by speed, temperature, and radial and axial loads.  While an MTBF figure can be generated, it would be rendered invalid by excursions beyond prescribed temperatures or load limits - such as prop strikes, or side loads.  MTBF must be determined on a case by case basis, and even then, it would be subject to numerous exceptions.

MAX VOLTAGE

Limited by kv (RPMs per volt) times the applied voltage.  Max voltage must be kept below the voltage which will spin the motor over max rpm for the motor series.

MAX AMPERAGE

See power ratings above.

COMPONENT SPECIFICATIONS

  • Winding temperature:  -- 180C
  • Magnet grade: - 180C UH grade
  • Bearings:  Japanese SPB bearings