32XX SERIES MOTORS:

79mm OD 3200 series innrunner BLDC motors feature a large diameter rotor in a fixed enclosure.  The high diameter to length bias achieves the high torque advantages of an outrunner with the mounting and operational advantages of a non-rotating enclosure.

  • Inrunner construction
  • 10,000 RPM max
  • 12 poles / 36 slots
  • 8mm shaft

OPTIONS:

  • FINNED CASE
  • WATERPROOF CASE
  • May be mated with P42 or P62 gearboxes for very high power-to-weight drives.

32XX SERIES POWER RANGES AND LENGTH

LENGTH
Continuous
Watts*
1,000
1,500
3,200
Max
Watts*
2,000
3,000
6,400
Physical
Length
65.9mm
65.9mm
65.9mm
91mm
91mm
116.7mm
116.7mm
Weight
680g

 


3205: 1,000-2,000 watt class BLDC motors



3207: 1,500-3,000 watt class BLDC motors



3210: 2,000-4,000 watt class BLDC motors

POWER RATINGS (Watts):

  • Continuous rating is the power the motor can deliver while maintaining the external housing temperatures below 100C.
  • MAX power rating is the power the motor can deliver beginning with motor at a temp of 20C until it reaches it's limit temperature of 100C.
  • The ratings are therefore dependent on a number of variables including air flow, ambient air temperature, contact cooling etc.

MTBF RATINGS:

When used within the constraints described above, BLDC motors' primary "wear" item(s) are the bearings supporting the shaft. Bearing life is inversely affected by speed, temperature, and radial and axial loads.  While an MTBF figure can be generated, it would be rendered invalid by excursions beyond prescribed temperatures or load limits - such as prop strikes, or side loads.  MTBF must be determined on a case by case basis, and even then, it would be subject to numerous exceptions.

MAX VOLTAGE

Limited by kv (RPMs per volt) times the applied voltage.  Max voltage must be kept below the voltage which will spin the motor over max rpm for the motor series.

MAX AMPERAGE

See power ratings above.

COMPONENT SPECIFICATIONS

  • Winding temperature:  -- 180C
  • Magnet grade: - 180C UH grade
  • Bearings:  Japanese SPB bearings