by admin | Dec 5, 2013 | Motors
All 19 series motors have 24 slot stators and 8 poles rotors Casing: Smooth or Finned Max RPM: 35,000 Case Diameter: 1.96″ Shafts: 5, 6, & 8mm Shaft Length: .75″ Mounting screws are M3 or M4 for “H” versions Direct Drive or Geared [table...
by admin | Dec 5, 2013 | Motors
All 17 series motors have 24 slot stators and 8 poles rotors Max RPM: 35,000 Case Diameter: 1.7″ Shaft: 5mm Shaft Length: .75″ Mounting screws are M3 Direct Drive or Geared The 17 series is designed to full the need for a high torque motor in a smaller...
by admin | Dec 5, 2013 | Motors
[table id=3 filter=”15xx” /]
by admin | Dec 5, 2013 | Motors
All 14 series motors have 12slot stators and 4 poles rotors Max RPM: 60,000 Case Diameter: 1.43″ Shaft: 5mm Shaft Length: .75″ Mounting screws are M3 Direct Drive or Geared The 1400 series fits in applications that require a standard 36mm diameter motor....
by admin | Dec 5, 2013 | Motors
Model Number: Neutrino 1210/-1850 Kv Noload: .4 amps Resistance: 0.20 ohms Weight: 16 grams Type: outrunner 24 slot stator 26 magnet poles Recommended controllers: P10,T09 –use low advance settings. Intended application: F3P indoor 3D planes Props: 7/4-8/4...
by admin | Dec 5, 2013 | Motors
All 11-series motors have 12 slot stators and 4 pole rotors Max rpm: 60,000 Case Dia. 1.14″ Shaft: 3.2mm (2.3 available) Shaft length: .75″ Mounting screws are M2.5 Direct Drive or Geared [table id=3 filter=”11xx”...
