1100 Motors Quick Look:

  • Inrunner construction
  • High speed operation – 70,000 RPM
  • 4 poles / 12 slots
  • 5mm shaft

Neumotors 1100 series brushless motors are manufactured in a wide variety of lengths and winds to provide increasing power ratings at a number of voltages. Select the desired motor power range from the table below.


May be mated with integral gearboxes for very high power-to-weight drives.

Neumotors brushless motors can be assembled in the USA from domestically manufactured components. Please call for details.


11xx Series Length and Power Range


See the tables below for kV and torque ratings.


1102: 100-200 watt class motors


1105: 200-400 watt class motors


1107: 300-600 watt class motors


1110: 400-800 watt class motors


1112: 600-1,200 watt class motors


1115: 700-1,400 watt class motors


1117: 800-1,600 watt class motors


1120: 900-1,800 watt class motors


    POWER RATINGS (Watts):

    • Continuous rating is the power the motor can deliver while maintaining the external housing temperatures below 100C.
    • MAX power rating is the power the motor can deliver beginning with motor at a temp of 20C until it reaches it's limit temperature of 100C.
    • The ratings are therefore dependent on a number of variables including air flow, ambient air temperature, contact cooling etc.


    When used within the constraints described above, BLDC motors' primary "wear" item(s) are the bearings supporting the shaft. Bearing life is inversely affected by speed, temperature, and radial and axial loads.  While an MTBF figure can be generated, it would be rendered invalid by excursions beyond prescribed temperatures or load limits - such as prop strikes, or side loads.  MTBF must be determined on a case by case basis, and even then, it would be subject to numerous exceptions.


    Limited by kv (RPMs per volt) times the applied voltage.  Max voltage must be kept below the voltage which will spin the motor over max rpm for the motor series.


    See power ratings above.


    • Winding temperature:  -- 180C
    • Magnet grade: - 180C UH grade
    • Bearings:  Japanese SPB bearings