NeuMotors 2200/12 Series Motors

2200 SERIES QUICK LOOK:

  • Inrunner construction
  • High speed operation – 40,000 RPM
  • 4 poles / 12 slots

Neumotors 2200/12 series brushless motors are manufactured in a wide variety of lengths and winds to provide increasing power ratings at a number of voltages. Select the desired motor power range from the table below.

Options:

  • 5, 6 or 8mm shafts
  • Finned case
  • Waterproof case
  • Internal fan for better cooling

May be mated with P42 or P62 gearboxes for very high power-to-weight drives.

 

2200/12 Series Length & Power Ranges:

LENGTH
Continuous
Watts*
2,500
2,800
3,200
4,200
5,000
Max
Watts*
5,000
5,600
6,400
8,400
10,000
Physical
Length
84mm
89mm
119mm
119mm
119mm
Weight
708g
818g
962g
1132g
1,358g

2215: 2,500-5,000 watt class BLDC motors

2217: 2,800-5,600 watt class BLDC motors

2220: 3,200-6,400 watt class BLDC motors

2225: 4,200-8,400 watt class BLDC motors

2230: 5,000-10,000 watt class BLDC motors

POWER RATINGS (Watts):

  • Continuous rating is the power the motor can deliver while maintaining the external housing temperatures below 100C.
  • MAX power rating is the power the motor can deliver beginning with motor at a temp of 20C until it reaches it's limit temperature of 100C.
  • The ratings are therefore dependent on a number of variables including air flow, ambient air temperature, contact cooling etc.

MTBF RATINGS:

When used within the constraints described above, BLDC motors' primary "wear" item(s) are the bearings supporting the shaft. Bearing life is inversely affected by speed, temperature, and radial and axial loads.  While an MTBF figure can be generated, it would be rendered invalid by excursions beyond prescribed temperatures or load limits - such as prop strikes, or side loads.  MTBF must be determined on a case by case basis, and even then, it would be subject to numerous exceptions.

MAX VOLTAGE

Limited by kv (RPMs per volt) times the applied voltage.  Max voltage must be kept below the voltage which will spin the motor over max rpm for the motor series.

MAX AMPERAGE

See power ratings above.

COMPONENT SPECIFICATIONS

  • Winding temperature:  -- 180C
  • Magnet grade: - 180C UH grade
  • Bearings:  Japanese SPB bearings